Soil   Hydrogeological   Nutrient Management   Property Development   Training
Welcome to CSCA Biosolids/Sludge

The CSCA Biosolids/Sludge site can be brokendown into three categories:

Disposal

By Products

Sludge

 

Bio-solids

A Water Treatment Plant By-product

March 6th, 2002

W.r. Walker P. Eng. President Walker Engineering inc.

 

What are Bio-solids?
The solid component remaining after the waste stream has been separated into liquid and solid streams. It usually take the form of a sludge, which can vary in concentration from 1% to 3% solids.

Source of Bio-solids

Sedimentation Chambers in the traditional flocculation / sedimentation / filtration / disinfection process

From the water used to backwash filters

In the case of slow sand filters, from the periodic cleaning of the surface layer of the sand.

Traditional Water Treatment
Four Stages

Flocculation
Sedimentation
Filtration
Disinfection

Sedimentation
Settles out of the particles which have formed from the application of the coagulant eg, aluminum sulphate (alum) and / or poly-electrolyte. The settled solids and an amount of water are withdrawn on a continuous or intermittent basis.

Filtration
The particles which have not been removed by sedimentation are largely captured in the filters, which allow the water to flow thru layers of specially engineered sands. Periodically, the filters are isolated and cleaned by directing water through them in the opposite direction. Backwashing is tricky the rate at which the cleaning water flows must be sufficient to clean the filters but not so great as to disturb the layering of the filter media. Generally the backwash rate is considerably higher than the normal filtering rate. Filter runtimes between backwashing may be from one day to several days. The amount of water used in the backwashing operation can be in the range of 2% to 5% of the filter thruí-put. Backwashing time can be typically 30 to 45 minutes.

The Combined Waste Stream

The Waste Stream from a typical Water Treatment Plant has, therefore, two components;

The waste drawn from the sedimentation tanks, and
The backwash water

Treatment for the Combined Waste Stream
The two waste streams are usually directed to an equalization tank - little more than a container which accommodates the flows as they occur and allows for treatment at a slower rate on a 24 hour basis.

The Liquid Stream
The supernatant - or liquid - at the top of the equalization tanks is usually drawn off and treated to achieve Ontario Drinking Water Standards before being released to the environment ñ a steam, a roadside ditch, for example.

This leaves the tricky stuff - the sludge- or use the fancy name "Biosolids".

Disposing of the Biosolids - Options

  • Concentrate using a thickener or centrifuge, truck thickened sludge to landfill

  • Direct the sludge to a municipal sewer system

  • Drying Beds

  • Freeze-Thaw lagoons - up to 30% solids

  • Most options need a landfill for final disposal

 
     
   
   
   
   

 


   
 ©Canadian Shield Consultants Inc. 2005 Last modified: 05/13/2005 14:58:36