Description
Premier Tech
Environment's PFS-200 to PFS-1000
Pressurized Flow Dividers divide
a pumped effluent flow into equal
portions, according to
installation needs. They enable
cluster installation of several
Ecoflo® ST-650 Biofilters in
high wastewater flow
applications.
Operation
principle
The unit divides
the effluent flow using pressure
generated by the pump and then
distributes the effluent to the
treatment units through gravity
flow pipes. This way, the length
of the piping systems is
irrelevant. All liquid must be
pumped out of the enclosure
before the next dosing. If the
installation design does not
enable this, then measures must
be taken to protect the system
from freezing.
Advantages
Division
of effluent flow into
equal portions;
Low-cost
solution;
Quick and
easy installation;
Easy
access to all components;
Virtually
maintenance free.
Features
2 and 3
outlets pressurized flow dividers
Discrepancy
of less than 5%;
Fits
flexible inlet pipe, 38
mm (1.5") inside
diameter;
PVC
outlet pipe, 100 mm
(4") - dr 35, 108 mm
(4.25") outside
diameter.
4 to 10
outlets pressurized flow dividers
Flow
discrepancy of less than
8%;
Contained
in 600 mm (24")
polyethylene casing;
Fits
flexible inlet pipe, 51
mm (2") inside
diameter;
PVC
outlet pipe, 100 mm
(4") - DR 35 outside
diameter.
Operation
Installation
requires nothing more
than connecting the
outlet end of the pumping
station to the inlet of
the pressurized flow
divider;
Gravity
outlets are connected to
100 mm (4") PVC
pipes that are connected
directly to Ecoflo®
ST-650 Biofilters or any
soil absorption system;
The
casing lid must be
accessible at all times
to enable annual system
inspection and
maintenance (or as
needed).
|
